Flash and Download MultiLaser M7S Plus M-JI02 Stock Rom Original firmware

Download MultiLaser M7S Plus M-JI02 Stock Firmware 

Download the latest MultiLaser M7S Plus M-JI02 Stock Rom (original firmware, flash file) MultiLaser M7S Plus M-JI02 You can check out our Multilaser update page for latest information on MultiLaser M7S Plus M-JI02 update rollout.

MultiLaser M7S Plus M-JI02

The MultiLaser M7S Plus M-JI02 Stock Rom will help you to Upgrade, Downgrade, or re-install Stock Rom Stock Firmware (OS) on your Mobile Device. Stock Rom Flash File (ROM) also helps you to repair the Mobile device, if it is facing any Software Issue, Bootloop Issue, IMEI Issue, or Dead Issue.

MultiLaser M7S Plus M-JI02 Stock Firmware (flash file)

Firmware File Name : MultiLaser_M7S_Plus_M-JI02_V4_20190612_PS.zip
Firmware File Size : 810 MB
Download Flash Tool : PhoenixSuit Tool download
How to Flash firmware : Guide How to Flash Firmware

server 1 (Google-Drive)server 2 (Google-Drive)

How to Flash or Install MultiLaser M7S Plus M-JI02 Firmware (ROM)

STEP 1 : Download and extract the MultiLaser M7S Plus M-JI02 Stock ROM (Firmware Flash File) package on the computer.
STEP 2 : After extracting the package, you will get the MultiLaser M7S Plus M-JI02 USB Driver, Firmware (ROM), Flash Tool, and How-to Flash Manual.
STEP 3 : Install the provided USB Driver on the computer. If in case you have already installed the MultiLaser M7S Plus M-JI02 USB Driver on the computer, then SKIP this step.
STEP 4 Follow the Link Guide to Flash the Stock Firmware (flash file) MultiLaser M7S Plus M-JI02 device.

Guide How to Flash Firmware

Important Notes::

[#]Download Flash Tool Latest release: If you wish to download the latest version of PhoenixSuit Tool, then head over to PhoenixSuit Tool download page.

[#] Please Take a Backup: Flashing or installing the MultiLaser M7S Plus M-JI02 Device, then we recommend you to take backup of your personal data from the Multilaser device, as flashing the ROM (firmware) will permanently delete your personal data from the device.

[#] Flashing the stock firmware on your MultiLaser M7S Plus M-JI02 with the following method will wipe all your data from the device. So make sure you backup all your important data before proceeding.

[#] The MultiLaser M7S Plus M-JI02  officially releases the firmware shared above. It helps you to recover the MultiLaser M7S Plus M-JI02 device, if it ever gets a boot loop, software error, update error, hanging, and dead issue.

[#] Request MultiLaser M7S Plus M-JI02 Firmware: If you are looking for any MultiLaser M7S Plus M-JI02 specific firmware that is not listed above, then you can request it through the comment box below (do not request firmware through the contact page or else it will be ignored).

Leave A Reply

Your email address will not be published.